Fujitsu Siemens Computers SPARC Enterprise T5140 Installation Manual page 108

installation instructions, optional components,
reference, 3
installing
mounting brackets, 71
IP address, 4
L
LEDs, ports, and slots illustrated, 7, 8
left, 15
left and right sides defined, 15
levers, locking, See "slide rail assembly locks"
locating pins for mounting brackets, 71
locations of ports, slots, and LEDs (illustration), 7, 8
locks, See "slide rail assembly locks"
logging into service processor
using network management port, 45, 50
using serial management port, 45
M
map of OpenBoot PROM devices, 55
minimum cable connections, 6
modem not for use with the SER MGT serial
management port, 32
mounting bracket
locating pins on chassis, 71
preparation for installation, 71
removing from slide rail, 71
unlocking, 71
mounting screws for rack, 19
N
netmask, 4
network management port
configuring and enabling, 44
not operational until configured, 5, 44
O
OpenBoot PROM device map, 55
optional components, 3
optional components, installation instructions in
service manual, 3
P
parity for serial terminal, no, 38
password command, 45
82 SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
path names, 55
pins, mounting bracket locating, 71
port locations illustrated, 7
ports, slots, and LEDs illustrated, 7, 8
power cycling the system, 57
powering on the system for the first time, 37
poweroff command, 58
poweron command, 51, 53
R
removing server from rack, 35, 79
reset
resetting the system with uadmin, 57
right and left sides defined, 15
RJ-45 cable, 6
S
screws for rack mounting, 19
serial terminal
settings, 38
server dismounting, 35
service processor
accessing with network management port, 50
accessing with serial management port, 45
connecting to the system console, 53
network management port not operational until
configured, 5
powering on for the first time, 38
powering on the system, 50
See also ILOM
set command, 47
set command, 47
show /SP/network command, 48
show-disks command, 56
slide rail spacing tool, 21
slots, ports, and LEDs illustrated, 7, 8
Solaris media kit contents, 6
spacing tool for slide rails, 21
Standby mode, 34
standby voltage causes service processor to power
on, 5
standby voltage, 3.3v, 41
stop bit, 38
system console escape sequence #., 58