Table of Contents
Advertisement
■
6. Attach a slide rail to the right front rack post.
a. Loosely attach the front of a slide rail to the right front rack post using two
Note – Do not tighten the screws yet.
FIGURE 2-5
b. Adjust the length of the slide rail by sliding the rear mounting flange to
c. Loosely attach the rear of the slide rail to the rear rack post with two
7. Attach the second slide rail to the left rack posts in a similar manner. Do not
tighten the screws.
20
SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
If your rack does not have threaded mounting holes, the mounting screws are
secured with a caged nut.
screws (
).
FIGURE 2-5
Mounting a Slide Rail (Either Server)
reach the outside edge of the rear rack post.
screws.
Advertisement
Table of Contents
