Siemens Simatic Ident Function Manual page 86

Setting parameters for blocks
3.5 Programming the Ident profile
Table 3- 63
Byte
Bytes 1...8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Table 3- 64
2 KB
32 KB
44 bytes
112 bytes
256 bytes
992 bytes
2000 bytes
20 bytes
8 KB
32 KB
64 KB
* The OTP memory is not initialized with this command.
)
Table 3- 65
Parameter
CMD
OFFSETBUFFER
LEN_DATA
TXREF
86
Explanation of the structure of the data attachment for the "FORMAT" command
Description
Reserved for security code (must be assigned "0", since SIMATIC RFID has had
no code previously)
Length of the following data, here 6
Permanently set to "0x03"
Permanently set to "0x00"
"INIT" value: The data area of the transponder is written with this value (hex for-
mat).
Permanently set to "0x00"
Memory size of the transponder (end address + 1; high byte, hex format)
Memory size of the transponder (end address + 1; low byte, hex format)
Memory sizes of the transponders
Transponder type
MOBY U RAM *
)
MOBY U RAM *
)
MOBY D I-Code 1
MOBY D ISO I-Code SLI
MOBY D ISO Tag-it HF-I
MOBY D ISO my-d
MOBY D FRAM
RF300 EEPROM
RF300 FRAM *)
RF300 FRAM *)
RF300 FRAM *)
PUT (not with RF61xR/RF68xR)
Value / description
0x65
Offset in the "TXREF" send buffer
Length of the parameter data to be sent
Parameter data to be written
Memory size
08 00
80 00
00 2C
00 70
01 00
03 E0
07 D0
00 14
20 00
80 00
FF 00
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
INIT duration
approx. 1 s
approx. 1.5 s
approx. 0.4 s
approx. 0.5 s
approx. 1 s
approx. 3 s
approx. 3 s
approx. 0.2 s
0.9 s
3.6 s
7.2 s