Siemens Simatic Ident Function Manual page 78

Setting parameters for blocks
3.5 Programming the Ident profile
Command Command code
HEX
WRITE-ID 0x67
KILL-TAG 0x6A
LOCK-TAG-BANK 0x79
EDIT-BLACKLIST 0x7A
GET-BLACKLIST 0x6C
READ-CONFIG 0x61
WRITE-CONFIG 0x78
78
Parameters used
ASCII
'g' OFFSETBUFFER,
EPCID_UID, LEN_ID,
NEW-LEN_ID, PSWD
'j' EPCID_UID, LEN_ID,
PSWD
'y' EPCID_UID, LEN_ID,
PSWD, ACTION, MASK
'z' EPCID_UID, LEN_ID,
MODE
'l' OFFSETBUFFER
'a' --
'x' LEN_DATA, CONFIG
Description
RF61xR/RF68xR:
Writes a new EPC-ID to the transponder.
RF61xR/RF68xR:
The transponder is permanently deactivated.
RF61xR/RF68xR:
The corresponding memory area of the tran-
sponder is blocked as specified.
RF61xR/RF68xR:
The black list is processed. The current tran-
sponder can be added, all identified transponders
added, individual transponders deleted or all tran-
sponders deleted.
RF61xR/RF68xR:
The entire TagIDs are read out from the black list.
Reads out the parameters from the communica-
tions module/reader.
Sends new parameters to the communications
module/reader.
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04