Troubleshooting - Radio Shack REALISTIC PRO-2042 Owner's Manual

TROUBLESHOOTING
If your scanner is not working as it should, these suggestions might help you elimi¬
nate the problem. If the scanner still does not operate normally, take it to your local
Tandy store for assistance.
Problem Suggestion
Scanner is on, but will not scan. Be sure SQUELCH is adjusted properly.
Scanner receives stations poorly or
not at all.
• Check the antenna (indoor or out¬
door).
• Signals may be blocked from being
received by the scanner due to metal
frames or material in the building.
Change the scanner's location and
try again.
• Be sure frequencies are pro¬
grammed properly and set with the
correct mode (AM, NFM, or WFM).
Scanner's keys or display work
poorly or not at all.
The scanner's processor might be
locked. Restart the scanner. See
"Restarting/Resetting the Scanner" on
Page 9.
Scanner does not work at all.
Check the AC power cord and outlet.
Scanner locks on frequencies that
have an unclear transmission.
Be sure birdie frequencies are not pro¬
grammed, or listen to birdie frequencies
manually. See "Birdie Frequencies" on
Page 38.
41