A Look At The Display - Radio Shack 200CH Owner's Manual

200ch vhf/air/uhf home scanner with scanner control protocol and wx alert
Hide thumbs Also See for 200CH:
Table of Contents

Advertisement

20-422.fm Page 10 Friday, January 7, 2000 12:54 PM
1–9, 0
CLEAR/ .
WX/E

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current operating mode. A good
look at the display will help you understand your scanner.
BANK
MON
P
CH
SCAN
MAN
PGM
10
Each key has a single-digit label, and the
also have a range of numbers. Use the digits on the keys to
enter the numbers for a channel or a frequency. Use the
range of numbers above the key (
lect or deselect the channels in a channel-storage bank.
Clears an incorrect entry, or enters the decimal point when
you enter a frequency.
Scans the seven preprogrammed weather channels; stores
frequencies into channels.
Appears with a number (1–10) to its right to show which
channel-storage banks are turned on for scanning.
Appears with a number (1–10) to its right to show which
monitor memory you are listening to.
Appears when you tune to a priority channel.
Appears with a number (1–200) to its left to show which
channel the scanner is tuned to.
Appears when you scan channels.
Appears when you manually select a channel.
Appears when you program the scanner.
and
keys
1
9
0
, for example) to se-
61–80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-422

Table of Contents