Sony DNW-7/7P Operation Manual page 85

3
Place a white test card under the same lighting conditions as the
subject to be shot, and zoom up to it. Alternatively, any white object
such as a cloth or a wall could be used.
The absolute minimum white area is as follows:
4
Adjust the lens iris.
If the lens is manually adjusted, adjust it as appropriate. If the lens
has an automatic iris, set the automatic/manual switch on the lens to
automatic.
5
Push the AUTO W/B BAL switch to WHT, and release the switch.
Rectangle centered on the screen:
the lengths of the sides are 70% of
the length or the width of the screen.
The white object must be within
the rectangle and have an area of
at least 10% of the screen.
Note
Make sure there are no bright spots in
the rectangle.
AUTO W/B BAL switch
Chapter 4 Adjustments and Settings for Recording
4
(Continued)
4-7