Sony DNW-7/7P Operation Manual page 221

2
Insert the WRR-855A, and fasten the four fixing screws.
Set the AUDIO IN switch to WIRELESS for the channel to be used.
For the operation of the WRR-855A, refer to the manual supplied with the WRR-
855A.
Fitting a WRR-28M (using a BP-L60/L90 Battery Pack)
1
(1) Attach the WRR tuner fitting (not supplied, service part number
A-8278-057-A) to the back of the camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the metal fitting position for a BP-L60/L90 Battery
Pack to be attached, and tighten the adjustment screws to fix
its position.
4 Attach the BETACAM holder kit supplied with the tuner to
the WRR tuner fitting.
Chapter 5 Setting Up the Camcorder
5
(Continued)
5-29