Sony DNW-7/7P Operation Manual page 223

3
Connect the tuner power cord to the DC OUT connector of the
camcorder, and the audio output cable to the AUDIO IN connector
for channel 1 or 2.
Set the AUDIO IN switch for
the appropriate channel to
REAR.
Fitting a WRR-28M (using an NP-1B or BP-90A Battery
Pack)
Before attempting the following attachment, make sure that an NP-1B
Battery Pack is contained in the DC-L1 Battery Adaptor or that a BP-
90A Battery Pack is contained in the DC-L90 Battery Adaptor.
Set the LINE/MIC/ 48 V ON
selector for the appropriate
channel to MIC.
•
•
L O C K
DC OUT
AUDIO IN for CH-1 or CH-2
Chapter 5 Setting Up the Camcorder
5
5-31