Sony DNW-7/7P Operation Manual page 159

m TEST OUT
DETAIL
APERTURE
SKIN TONE DTL
MATRIX
GAMMA
CHROMA
TEST SAW
CROSS COLOR FLT
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired output (or use the rotary
encoder).
Note that the test output signal reverts to ENC (encoded) every time
the camcorder is switched on.
4
Press the rotary encoder to display a question mark to the left of the
display.
5
Turn the rotary encoder to select the desired output.
The R G and B G signal outputs can be selected only when R G/
B G SEL on the OPERATION MODE page is set to ON.
Refer to the Maintenance Manual for information about the OPERATION
MODE page.
6
Press the rotary encoder, so that the question mark disappears.
FUNCTION 1/2
: ENC
: ON
: ON
: OFF
: OFF
: ON
: ON
: OFF
: OFF
FUNCTION 1/2 page (factory settings)
Chapter 4 Adjustments and Settings for Recording
Composite video
signal output
a)
a) DNW-7/90/90WS only
4
(Continued)
4-81