Sony DNW-7/7P Operation Manual page 130

4 Shot number indicator
This shows the shot number.
5 Battery state indicator
When an Anton Bauer Intelligent Battery System is used, this shows the
remaining battery capacity numerically.
6 Self-diagnosis indicator
When a fault has been detected in the camcorder, the indication "xxx?"
4
appears. For example, when a fault is detected in the camera, the
indication "CAM?" appears.
7 16:9 mode recording indicator (DNW-90WS/90WSP only)
This indicates recording in the 16:9 mode. This indicator is recorded
together with the color bars.
8 Iris setting indicator
This shows the iris setting (the f-stop) of the lens.
9 Remaining tape indicator
This shows the remaining tape recording time (in minutes) of the VTR.
Display
F-15
15-10
10-5
5-0
5-0 (flashing)
....................................................................................................................................
1) Iris setting indicator
This indicator appears only when you use a lens that has an iris opening display
function.
4-52
Chapter 4 Adjustments and Settings for Recording
1)
Example of remaining tape indicator
Tape time remaining
Full to 15 minutes
15 to 10 minutes
10 to 5 minutes
5 to 2 minutes
Less than 2 minutes