Establish The Connection - Juniper NFX150-S1 Quick Start Manual

NFX150-S1 Network Services Platform Quick Start
root@#
Change the password for the root administration user account:
7.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
Enable SSH service for the root user:
8.
[edit]
root@# set system services ssh root-login allow
(Optional) Enable WAN connection for devices connected on LAN:
9.
[edit]
root@# set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server dns-server-ip
Commit the configuration:
10.
[edit]
root@# commit

Establish the Connection

Connect the device to the Internet Service Provider (ISP) by using the following step:
1.
NOTE: For information on interface mapping, see
Connect one of the WAN ports such as
DHCP.
Figure 4: Connecting the Interfaces on an NFX150-S1 Device
Optionally, you can obtain a SIM card from the ISP and connect the device through LTE.
NOTE: The LTE expansion module must be purchased separately.
For more information about SIM card activation, see the Getting Started with NFX150 available at:
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/
6
Table 2
or to the ISP. The device is assigned an IP address by the ISP through
heth-0-4 heth-0-5
and Table 3.
Internet
Copyright © 2018, Juniper Networks, Inc.