Advertisement
Quick Links
Day One+
NFX150
IN THIS GUIDE
Step 1: Begin | 1
Step 1: Begin
IN THIS SECTION
Meet the NFX150 | 1
NFX150 Models | 2
Power On | 4
Meet the NFX150
®
The Juniper Networks
platform that delivers fully automated, secure SD-WAN, secure router, and cloud CPE solutions. Equipped with SRX Series
next-generation firewall software and 4G/LTE interface speeds, you can use the NFX150 to manage multiple Juniper and
third-party virtual network functions (VNFs) on a single device. Plus, it's easy to deploy and manage the NFX150 with
zero-touch provisioning (ZTP).
NFX150 Network Services Platform is a software-driven customer premises equipment (CPE)
Advertisement
Related Manuals for Juniper Day One+ NFX150 Series
Summary of Contents for Juniper Day One+ NFX150 Series
-
Page 1: Table Of Contents
SD-WAN, secure router, and cloud CPE solutions. Equipped with SRX Series next-generation firewall software and 4G/LTE interface speeds, you can use the NFX150 to manage multiple Juniper and third-party virtual network functions (VNFs) on a single device. Plus, it’s easy to deploy and manage the NFX150 with... -
Page 2: Nfx150 Models
NFX150 Models The NFX150 comes in a 1-U rack mount model (NFX150-S1) and a compact desktop model (NFX150-S1-C). Both models are available with or without LTE support. For increased capacity, you can install an expansion module in the NFX150-S1 rack mount model. The NFX150 has: Four 10/100/1000BASE-T RJ-45 ports that can be used either as access ports or as uplinks Two 1GbE/10GbE SFP+ ports... - Page 3 install it in a four-post rack. Likewise, you’ll need to order a separate wall mount kit if you want to install the NFX150 on the wall. What’s in the Box? Power cord appropriate for your geographic location RJ-45 Ethernet cable RJ-45 to DB-9 serial port adapter Accessory kit The accessory kit contains four rubber feet (for desktop installations), one pair of mounting blades, and eight Phillips...
-
Page 4: Power On
3. Lift the NFX150 and position it in the rack. Line up the bottom hole in each mounting bracket with a hole in each rack rail, making sure the NFX150 is level. 4. While you’re holding the NFX150 in place, have a second person insert and tighten the rack mount screws to secure the mounting brackets to the rack rails. -
Page 5: Step 2: Up And Running
3. Attach the power cord retainer clip: a. Squeeze the two sides of the power cord retainer clip. b. Insert the L-shaped ends into the holes in the bracket on each side of the AC power cord inlet on the rear panel. The power cord retainer clip extends out of the chassis by three inches. - Page 6 USB driver from the following page and install it on your laptop or desktop PC: https://www.juniper.net/support/downloads/junos.html 2. Log in as root. You don’t need to enter a password. If the software boots before you connect the cable to the console port, you might need to press the Enter key for the prompt to appear.
- Page 7 9. Connect your laptop to a LAN port (ports 0/0 through 0/3). The DHCP server running on the NFX150 assigns an IP address to your laptop. 10. Open a browser on your laptop, navigate to https://www.juniper.net, and verify your connectivity.
-
Page 8: Step 3: Keep Going
Turn On Your Licenses Licensing Guide Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners.