Using The Viewfinder - Sony DCR PC 8 E Operating Instructions Manual

Using the viewfinder

You can pull out the viewfinder until it clicks,
and then turn the LCD panel over and move it
back to your camcorder body with the LCD
screen facing out. You can operate with the touch
panel using the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader
on the touchpanel using the viewfinder.
(1) In CAMERA mode, pull out the viewfinder
until it clicks, and then turn the LCD panel
over and move it back to your camcorder
body with the LCD screen facing out.
(2) Press OFF. The message PANEL OFF
appears on the screen.
(3) Press OK. The LCD screen is turned off.
(4) Press the LCD screen. EXPOSURE,
ON and FADER appear.
(5) Select the desired item, then press
EXPOSURE: adjust the exposure by pressing
–/+.
FADER: press FADER until the desired fader
mode is displayed (p. 58).
The indicator changes as follows:
FADER t M. FADER t BOUNCE t
MONOTONE t OVERLAP t WIPE
t DOT t (no indicator)
ON: The LCD screen lights up.
To make the buttons on the LCD
screen disappear
80
Press OK.
4
EXPO–
SURE
ON
(1)
OK,
(2)
OK.
(3)
(4)
(5)
OK
FADER
t t
t t
t t t