Sony DCR PC 8 E Operating Instructions Manual page 55

Recording a still image on a tape
– Tape Photo recording
Notes
•During tape photo recording, you cannot
change the mode or setting.
•When recording a still image, do not shake
your camcorder. The image may fluctuate.
•The tape photo recording function does not
work during following operations:
– Fader
– Digital effect
If you record a moving subject with the tape
photo recording function
When you play back the still image on other
equipment, the image may fluctuate.
To use the tape photo recording function
using the Remote Commander
Press PHOTO on the Remote Commander. Your
camcorder records an image on the screen
immediately.
To use the tape photo recording function
during normal CAMERA recording
You cannot check an image on the screen by
pressing PHOTO lightly. Press PHOTO deeper.
The still image is then recorded for about 7
seconds and your camcorder returns to the
standby mode.
55