Quickly Locating A Scene Using The Zero Set Memory Function - Sony DCR PC 8 E Operating Instructions Manual

Quickly locating a
scene using the zero
set memory function
Your camcorder goes forward or backward to
automatically stop at a desired scene having a
tape counter value of "0:00:00". Use the Remote
Commander for this operation.
(1) In the playback mode, press DISPLAY on the
Remote Commander if the counter is not on
the screen.
(2) Press ZERO SET MEMORY on the Remote
Commander at the point you want to locate
later. The tape counter shows "0:00:00" and
the ZERO SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape
counter's zero point. The tape stops
automatically when the tape counter reaches
approximately zero. The ZERO SET
MEMORY indicator disappears and the time
code appears.
(5) Press N. Playback starts from the counter's
zero point.
Notes
•When you press ZERO SET MEMORY before
rewinding the tape, the zero set memory
function will be cancelled.
•There may be a discrepancy of several seconds
between the time code and the tape counter.
•The ZERO SET MEMORY indicator disappear
when you press FN.
If a tape has a blank portion in the recorded
portions
The zero set memory function may not work
correctly.
DISPLAY
m
x
(1)
(2)
(3) x
(4) m
(5)
N
ZERO SET MEMORY
N
87