Sony DCR PC 8 E Operating Instructions Manual page 28

Step 4 Using the touch panel
To cancel settings
Press OFF to return to PAGE1/PAGE2/
PAGE3.
Notes
•When using the touch panel, press operation
buttons with your thumb supporting the LCD
screen from the back side of it or press those
buttons lightly with your index finger. Do not
press them with sharp-pointed objects such as
pens.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD
screen lightly to make it appear. You can
control the display with DISPLAY/TOUCH
PANEL on your camcorder.
•When operation buttons do not work even if
you press them, an adjustment is required
(CALIBRATION) (p. 172).
•When the LCD screen gets dirty, use the
supplied cleanig cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The colour of the items changes to grey.
Touch panel
You can operate with the touch panel using the
viewfinder (p. 80).
Press FN to display the following buttons:
In CAMERA mode
PAGE1 MENU, SPOT METER, FADER,
DIG EFFT, END SCH, EXPOSURE
PAGE2 TITLE, LCD BRT, VOL
PAGE3 SELFTIMER
In VCR mode
PAGE1 MENU, LCD BRT, VOL, END SCH
PAGE2 TITLE, DIG EFFT, PB ZOOM
PAGE3 DATA CODE, V SPD PLAY,
A DUB CTRL, REC CTRL
28