Step 3 Inserting A Cassette - Sony DCR PC 8 E Operating Instructions Manual

Step 3 Inserting a
(1) Install the battery pack, or connect the AC
power adaptor for the power supply (p. 18 to
23).
(2) Slide OPEN/ZEJECT in the direction of the
arrow and open the lid. The cassette
compartment automatically lifts up and
opens.
(3) Push the middle portion of the back of the
cassette to insert.
Insert the cassette in a straight line deeply into
the cassette compartment with the window
facing out.
(4) Close the cassette compartment by pressing
the mark on the cassette compartment.
The cassette compartment automatically goes
down.
(5) After the cassette compartment goes down
completely, close the lid until it clicks.
2
OPEN/ZEJECT
To eject a cassette
Follow the procedure above, and take out the
cassette in step 3.
Notes
•Do not press the cassette compartment down.
Doing so may cause malfunction.
•The cassette compartment may not be closed
when you press any part of the lid other than
the mark.
When you use mini DV cassette with cassette
memory
Read the instruction about cassette memory to
use this function properly (p. 161).
To prevent accidental erasure
Slide the write-protect tab on the cassette to
expose the red mark.
26
cassette
3, 4
(1)
(2)
Z
(3)
(4)
(5)
5