Sony DCR PC 8 E Operating Instructions Manual page 108

Dubbing only desired scenes
– Digital program editing
Operation 1: Making the
Programme
(1) Insert the tape for playback into your
camcorder, and insert a tape for recording
into the VCR.
(2) Press FN to display PAGE1.
(3) Select VIDEO EDIT in
settings (p. 132).
Then press EXEC.
(4) Search for the beginning of the first scene you
want to insert using the video control buttons
on the LCD screen, then pause playback. You
can fine-adjust one frame at a time.
(5) Press MARK IN on the screen.
The IN point of the first programme is set,
and the top part of the programme mark
changes to light blue.
(6) Search for the end of the first scene you want
to insert using the video control buttons on
the LCD screen, then pause playback.
(7) Press MARK OUT on the screen.
The OUT point of the first programme is set,
then the bottom part of the programme mark
changes to light blue.
(8) Repeat steps 4 to 7.
When one programme is set, the programme
mark changes to light blue.
You can set 20 programmes in maximum.
108
in the menu
3
5~8
V I DEO ED I T
MARK START UNDO
OUT
TOTAL 0:00:00:00
SCENE 0
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
EXIT
OTHERS
DATA CODE
BEEP
COMMANDER
D I SPLAY
V I DEO ED I T READY
ED I T SET
EXEC RET.
V I DEO ED I T
0:08:55:06
ERASE MARK START
ALL I N
TOTAL 0:00:13:00
SCENE 1
END
1
V I DEO ED I T
MARK START
I N
TOTAL 0:00:00:00
SCENE 0
V I DEO ED I T
0:09:07:06
UNDO ERASE MARK START
ALL I N
TOTAL 0:00:47:12
SCENE 3
END
0:32:30:14
UNDO ERASE
ALL
END
0:10:01:23
UNDO ERASE
ALL
END