Sony DCR PC 8 E Operating Instructions Manual page 130

Labelling a cassette
To return to FN
Press EXIT.
To erase the label you have made
Select C in step 6. The last character is erased.
To change the label you have made
Insert the cassette to change the label, and
operate in the same way to make a new label.
If you set the write-protect tab of the tape to
lock
You cannot label the tape. Slide the write-protect
tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because
the memory is full. In this case, delete data you
do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to 4 titles also
appear.
When the "-----" indicator has fewer than 10
spaces
The cassette memory is full.
The "-----" indicates the number of characters
you can select for the label.
To erase the title
Press C. The last character is erased.
To enter a space
Press c.
To enter the same character on the same
button in succession
Press c to move the cursor to the next position,
and enter the character.
130
C
C
c
c