Rec Review - Sony DCR PC 8 E Operating Instructions Manual

Checking the recording
– END SEARCH / EDITSEARCH / Rec
Review
EDITSEARCH
You can search for the next recording start point.
(1) In the standby mode, press FN to display
PAGE1.
(2) Press MENU, then set EDITSEARCH to ON in
in the menu settings.
Hold down the 7/– · + side of EDIT. The
recorded section is played back.
+ : to go forward
7/– : to go backward
Release 7/– · + to stop playback. If you press
START/STOP, re-recording begins from the
point you released 7/– · +. You cannot monitor
the sound.

Rec Review

You can check the last recorded section.
In the standby mode, press the 7/– side of EDIT
momentarily .
The section you have stopped most recently will
be played back for a few seconds, and then your
camcorder will return to the standby mode. You
can monitor the sound from the speaker or
headphones.
End search function
When you use a tape without cassette memory,
the end search function does not work once you
eject the cassette after you have recorded on the
tape. If you use a tape with cassette memory, the
end search function works even once you eject
the cassette.
If a tape has a blank portion in the recorded
portions
The end search function may not work correctly.
44
(1)
(2)
7
7
7 ·
·
7 ·
7