To Display The Screen Indicators - Display Function - Sony DCR PC 8 E Operating Instructions Manual

Playing back a tape
To display the screen indicators
– Display function
Press DISPLAY/TOUCH PANEL on your
camcorder or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear on the screen.
To make the indicators appear, press DISPLAY/
TOUCH PANEL or DISPLAY again.
About date/time and various setting
Your camcorder automatically records not only
images on the tape but also the recording data
(date/time or various settings when recorded)
(Data code).
Follow the steps below to display the data code
using the touch panel or the Remote
Commander.
Using the touch panel
(1) In the playback mode, press FN and select
PAGE3.
(2) Press DATA CODE.
(3) Select CAM DATA or DATE DATA, then
press OK.
(4) Press EXIT.
Using the Remote Commander
Press DATA CODE button on the Remote
Commander in the playback mode.
The display changes as follows:
date/time t various settings (SteadyShot OFF,
exposure, white balance, gain, shutter speed,
aperture value) t no indicator
Not to display various settings, set DATA CODE
to DATE in the menu settings (p. 132).
The display changes as follows when you press
the DATA CODE button on the Remote
Commander: date/time y no indicator
(1)
(2)
DATACODE
OFF OK
CAM DATE
DATA DATA
(3)
(4)
t
t
y
47