Sony DCR PC 8 E Operating Instructions Manual page 109

Dubbing only desired scenes
– Digital program editing
Erasing the programme you have set
Erase OUT mark first, and then IN mark of the
last programme.
(1) Press UNDO. The last programme mark
flashes on the LCD screen.
(2) Press EXEC. The setting is cancelled.
To cancel erasing
Press CANCEL in step 2.
Erasing all programmes
(1) Select VIDEO EDIT in
settings.
(2) Press ERASE ALL. All the programme marks
flash on the LCD screen.
(3) Press EXEC. The settings are cancelled.
To cancel erasing all programmes
Press CANCEL in step 3.
To finish making programmes
Press END.
The programme is stored in memory until the
tape is ejected.
Note
You cannot operate recording during the Digital
program editing.
On a blank portion of the tape
You cannot set IN or OUT.
If there is a blank portion between the IN
point and the OUT point on the tape
The time code may not be displayed correctly.
in the menu
(1)
(2)
(1)
(2)
(3)
109