Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony DCR PC 8 E Operating Instructions Manual

Step 1 Preparing the

Installing the battery pack

(1) While sliding BATT (battery) release lever in
the direction of the arrow 1, slide the battery
terminal cover in the direction of the arrow
2.
(2) Insert the battery pack in the direction of the
arrow until it clicks.
1
To remove the battery pack
The battery pack is removed in the same way as
the battery terminal cover.
Note on the battery terminal cover
To protect the battery terminals, install the
battery terminal cover after the battery pack is
removed.
18
power supply
2
1
(1)
(2)
2
1
2