Sony DCR PC 8 E Operating Instructions Manual page 97

Dubbing a tape
Using the i.LINK cable (DV connecting
cable)
Simply connect the i.LINK cable (DV connecting
cable) (optional) to DV of your camcorder and
to DV IN of the DV products. With digital-to-
digital connection, video and audio signals are
transmitted in digital form for high-quality
editing. You cannot dub the titles, display
indicators or the contents of cassette memory.
Set the input selector on the VCR to the DV input
position if the VCR is equipped with the input
selector.
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Prepare the VCR for recording.
Set the input selector to LINE. Refer to the
operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
DV
: Signal flow/
When you have finished dubbing a
tape
Press x on both your camcorder and the VCR.
(1)
(2)
(3)
(4)
(5)
(optional)/
x
DV
DV IN
97