To Display The Screen Indicators - Display Function - Sony DCR-HC15 Operation Manual

Playing back tape
To display the screen indicators – Display function
Press DSPL/BATT INFO on your camcorder.
The indicators disappear from the screen.
To make the indicators appear, press DSPL/BATT INFO.
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded)
Follow the steps below to display the data code using the touch panel.
(1) Set the POWER switch to VCR, then play back the tape.
(2) During playback, press FN and select PAGE2.
(3) Press DATA CODE.
(4) Select CAM DATA or DATE DATA, then press
(5) Press EXIT.
[a] Tape counter or time code
[b] SteadyShot off
[c] Exposure
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
Date/time Various settings
50min
0:00:23:01
JUL 14 2004
12 : 05 : 56
PM
DSPL/BATT INFO
OK.
50min
0:00:23:01
AUTO
6 0 AWB
F1.7 9 dB
(Data code) .
33