Step 1 Preparing The Power Supply - Sony DCR-TRV8 Operating Instructions Manual

Step 1 Preparing the power supply
I
Use the battery pack after charging it for your camcorder.
Your camcorder operates
oray
with me "InfoL1THIUM" battery pack (M series),
"InfoLITHIUM" is a trademark of Sony Corporation.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug's • mark facing up.
{2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF. Charging begins. The remaining battery time is
indicated in minutes on thedisplay window.
When the remaining battery indicator changes to i, norma| charge is completed. To
fully charge the battery (full charge), leave the battery pack attached for about I hour
after normal charge is completed until FULLappears in the display window. Fully
charging the battery allows you to use the battery longer than usual.
2
10