2. Copier-specific Adjustments
2.24 To Change Gray Tone
Before adjustment
Explanation
The gray tone can be changed when an original including gray color is copied.
Procedures
The service technician must perform the adjustments.
(1)Select [08 SETTING MODE] and change the setting value of the code [7614] to enable the User custom
mode for the full color.
For details, refer to "2.18.2 To Adjust Custom Mode Settings in Full Color Mode".
Base mode: [Text/Photo] (Setting value: 1)
(2)Select [05 ADJUSTMENT MODE] and change the setting value for the code [7690].
Recommended
[05] Code
value
05-7690
Caution after the adjustment
Nothing in particular
Remarks
The setting content of the values "2" and "4" is the same as that for the default ("0").
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Acceptable
value
range
3
0 to 4
2-86
After adjustment
Default
Remarks
0: Default (Gray reproduction level is
equivalent to the Text/photo mode.)
1: Gray reproduction level is equivalent to
0
the Photo mode.
3: The gray tone becomes a more bluish
one.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved