To Closely Match The Color Balance Of The Original - Toshiba e-Studio6506AC Imaging Manual

2.2 To Closely Match the Color Balance of the Original

Before adjustment
The copy image looks yellowish, compared
with the original.
 Explanation
Depending on the color balance of the original, the copy image sometimes looks different from the original. To
make the colors on the copy the same as those in the original, perform image quality control, automatic
calibration, color adjustment (color balance, RGB and hue adjustments), and color density adjustment.
 Procedures
* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed
below. You can use one procedure in conjunction with another. But if this changes the image quality more than
required or loses the effectiveness of the adjustment, restore the settings made in the previously used procedure
to the original ones. Then use other procedures.
* Both the service technician and the user can use procedures (1) to (3).
* Only the service technician must use procedure (4) and (5).
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Copy
2-11
2. Copier-specific Adjustments
After adjustment
The color balance of the copy image is closely
matched with that of the original.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
Copy