Toshiba e-Studio6506AC Imaging Manual page 93

(1) Press [BASIC] on the Control Panel and select the original mode option, as follows:
• To copy in the Full color or the Auto color mode: Select the Printed image mode option.
• To copy in the Black mode:
* When copying a photo image in the Full color mode, select the Photo mode option from among the original
mode options.
* To have the above original mode options selected by default, refer to 2.18 To Program Frequently Used
Copy Settings (To Use Custom Mode).
After changing the default original mode option, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(2) Press [IMAGE] on the Control Panel. Press [SHARPNESS].
Press [SOFT] to soften the copy image.
After softening the copy image, copy and check the copy image quality.
If further image quality adjustment is necessary, go to the next step.
(3) Select [05 ADJUSTMENT MODE]. Change the values for codes [7056] to [7058], [7061], [7249] and [7794]
to [7800] to adjust the default value for the sharpness intensity.
* Decreasing the sharpness intensity will minimize the edges of the image.
Color mode Original mode
Text / Photo
Black
User custom
Image smoothing
Text / Photo
Printed image
Full color
User custom
Red seal color
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Select the Photo mode option.
[05] code
05-7056
Text 05-7057
Photo 05-7058
05-7249
05-7061
05-7796
Text 05-7797
05-7798
Photo 05-7799
Map 05-7800
05-7795
05-7794
2-47
2. Copier-specific Adjustments
Accepta
Recommended
ble value
value
range
Set a value smaller
than 128. 0 to 255
(28 to 127)
Set a value smaller
than 128. 0 to 255
(28 to 127)
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
Default
128
128