Toshiba e-Studio6506AC Imaging Manual page 204

3. Printer-specific Adjustments
* When the halftone is set to "Auto", the gamma balance can be adjusted for every print data format (Text,
Graphic and Image).
* The subcode varies according to the area where the density is adjusted. Refer to the table below and set the
subcode for the area to be adjusted.
* Whether to fix or change the maximum density in a high-density area can be selected by the setting of 05-
8066.
Subcode
0
1
2
<Note> • This adjustment changes the values set in the MFP. Therefore, it will affect every user who
uses the printer by connecting it to the MFP. After the adjustment, the values changed will be
applied to all printouts for the "Halftone" option. (For instance, if the value for [05] code for PCL
and Detail is changed, it will be applied to printing performed with PCL6 and Halftone = "Detail"
(or "Auto") selected.) Carefully perform the adjustment, being aware that the image quality of all
future printouts will be changed, when printing out originals other than the one that is used for the
adjustment.
• When "Mono" is selected from among the "Color" options and "Auto" (default) is selected from
among the "Halftone" options, "Detail" of the "Halftone" options is applied to text, and "Smooth" is
applied to raster data (images) and graphics(illustrations). Therefore, particular attention is required
since the adjustment may have a different impact according to the patterns of the image to be
printed.
After increasing the density, print and check the print image quality.
If further image quality adjustments are still necessary, use the next procedure.
 Caution after the adjustment
The adjustment may possibly cause outlined edges, jaggies and variations in gradation. As a result the photo
image may look unnatural. Therefore, carefully perform the adjustment, while checking the printouts.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Area where the density is adjusted
Low-density area
Medium-density area
High-density area
3-68
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved