Toshiba e-Studio6506AC Imaging Manual page 87

(2) Press [IMAGE] on the Control Panel. Press [SHARPNESS].
Press [SOFT] to soften the copy image.
After softening the copy image, copy and check the copy image quality.
If further image quality adjustments is necessary, go to the next step.
(3) Select [05 ADJUSTMENT MODE].Change the values for codes [7056] to [7058], [7249], [7794] to [7806],
and [7061] to adjust the default value for the sharpness intensity.
* Decreasing the sharpness intensity will minimize moiré.
Color mode Original mode
Full color
Mono color
Twin color
Black
Image smoothing
* The smaller the value is, the weaker the sharpness intensity becomes. The larger the setting value is, the
stronger the sharpness intensity becomes.
Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in
the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the
sharpness intensity by 25. If the sharpness intensity of the center value is changed, each step of the
indicator will be changed accordingly. (For instance, if the center value is decreased by 25 (softer), the
value of each step of the indicator will also be decreased by 25 (softer).)
However, the range of adjustment values that is valid for sharpness level change is from -100 to +100 of
the total of the setting value of the [05] code and that of the indicator. For instance, if the setting value of
the [05] code is "103" (-25 from the default value), the limit of the steps in the soft side of the indicator is
"-3". If the step is set at "-4", the image quality will not be changed.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
[05] code
Text/Photo 05-7796
Text 05-7797
Printed Image 05-7798
Photo 05-7799
Map 05-7800
User custom 05-7795
Red seal color 05-7794
Text/Photo 05-7801
Text 05-7802
Printed Image 05-7803
Text/Photo 05-7804
Text 05-7805
Printed Image 05-7806
Text/Photo 05-7056
Text 05-7057
Photo 05-7058
User custom 05-7249
05-7061
2-41
2. Copier-specific Adjustments
Acceptable
Recommended
value
Set a value smaller
than 128.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
value Default
range
0 to 255 128