To Print A Full-Color Original In Two Colors - Toshiba e-Studio6506AC Imaging Manual

3.24 To Print a Full-Color Original in Two Colors

Before adjustment
The original is printed in the Full color mode.
 Explanation
Select the twin color print mode option, in order to change colored text and lines on full-color original and print
out the original.
* The gradation reproduction for twin-color print can be switched by means of the following self-diagnostic code.
Enter [05 ADJUSTMENT MODE] and change the setting value for the code [8002].
[05] Code Setting value
8002
* The Twin Color mode is not available when 1200 dpi is selected for the PS3 printer driver.
 Procedures
* The procedure to use varies depending on whether "To Adjust Colors", "To Adjust the Sharpness" or "To Print a
Full-Color Original in Two Colors". Refer to the procedure corresponding to the particular user's request.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Gradation reproduction priority (The gradation ability of
0
an original such as a photo becomes more emphasized.)
Text reproduction priority (Text or lines can be printed
1
more clearly.)
3-107
3. Printer-specific Adjustments
After Adjustment
The areas other than black is printed in the
same color (Red).
Contents
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
Default
0