Tax/Vat Rate Preset - Royal 220DX Operation Manual

P mode(901)[qty/time] Printing all the Logos
(13) Clerk key function
F 1 3 - A
A ：
0 = RCPT/OFF key
1 = [clerk] key

7.5 TAX/VAT Rate Preset

Each either TAX or VAT method depending on the Bit A for Terminal Status 4
programming.
Four TAX rates can be programmed. Each can be percent rate, or tax table.
Four VAT rates can be programmed. Each can be percent rate.
Change condition:
1. The sales total memory must be blank.
2. When the register has registration data, must make sure all reports are reset and the
grand total is blank.
7.5.1 TAX Rate Preset
Select the TAX TYPE:
(X) [Tax shift] (TAX TYPE) [Sub Total] setting the tax by the tax type
X: 1~4 TAX INDEX
TAX TYPE: 0: FIXED TAX
1: TAX TABLE
1. FIXED TAX SETTING
(TAX RATE) [Sub Total] (TAX LIMIT)[Sub Total] ( DESCRIPTOR )[Sub
Total][TOTAL]/ [check]
2. TAX TABLE
A TAX table consists of a series of graduated tax amounts which correspond to dollar
values. A repeating pattern among the breakpoints must be established to determine the
two segments. Usually the first several breakpoints are irregular. The second segment
consists of the breakpoints that make up one complete repetitive pattern. A maximum of
63 breakpoints can be entered. Below is a simple tax table, showing the irregular and
regular breakpoints.
27
 Default