Table of Contents
Advertisement
TAX RATE
(Continued)
Example: Program Tax 1 as 6%:
1.
Turn the key to the "PRG" (PROGRAM) position.
If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
2.
key, or if you did not program a Manager Password, go to Step 3.
3.
TYPE (1), PRESS [PO/-%], TYPE (60000), then PRESS the [AMT TEND/TOTAL] key.
Example: Program a second tax rate: Tax 2 is 7.5%
1.
Turn the key to the "PRG" (PROGRAM) position.
2.
If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
key, or if you did not program a Manager Password, go to Step 3.
3.
TYPE (2), PRESS [PO/-%], TYPE (75000), then PRESS the [AMT TEND/TOTAL] key.
STEP 3: TAX TABLE RATE
Refer to Appendix 1 to locate the tax table codes listed for y our particular state. If your state's tax rate is not
listed in Appendix 1, refer to Appendix 2 for instructions on calculating your own state's tax table codes.
Remember: Tax 1, Tax 2 and Tax 3 can be programmed with a Tax Table Rate.
Important: Step 1, on Page 21 must be completed before programming the Tax Table Rate.
TO PROGRAM A SINGLE TAX TABLE RATE
"PRG" + (ENTER TAX #) + [PO/-%] + (STATE TAX TABLE CODE) + [ST W/TAX] + [#/ST/NS]
1: Tax 1
2: Tax 2
3: Tax 3
Example: The tax code for Arizona's tax rate of 4% is: 138-100-4-13-19-23-27-27-29-25-25-25-25.
To program this under Tax 1, which you must have previously defined as a Tax Table
Rate per the instructions in Step 1:
1.
Turn the key to the "PRG" (PROGRAM) position.
2.
If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
key, or if you did not program a Manager Password, go to Step 3.
3.
TYPE
(1), then PRESS [PO/-%].
4.
TYPE
(138), then PRESS the [ST W/TAX] key.
5.
TYPE
(100), then PRESS the [ST W/TAX] key.
6.
Continue typing the State Tax Table Codes and
finished.
7.
When finished, PRESS the [#/ST/NS] key to finalize.
Note:
If a mistake occurs during programming the State Tax Table Codes, PRESS the [CLEAR] key and
begin again with Step 3.
23
Repeat for each code
PRESS the [ST W/TAX] key after each code until
Advertisement
Table of Contents
