Working Type Choose; Changing To Restaurant Mode - Royal 220DX Operation Manual

5 WORKING TYPE CHOOSE

The machine has two working type, Retail Mode and Restaurant Mode.
After all clear, the Retail Mode is default.
Note:
After do the ECR work type change, the following will do automatically:
a. Clear all the report data, both daily and period to date
b. Initialize the department programming parameter to default
c. Initialize the PLU programming parameter to default
d. Initialize the table programming parameter to default

5.1 Changing to Restaurant Mode

The procedure for changing the register to Restaurant Mode:
Operation:
1. Switch the control lock to the Prog mode.
2. Enter "202" by numeric keypad, then press [qty/time] key.
3. The message "SUrE" will be displayed.
4. Press the [subttl] key to confirm. (Other function keys to discard)
5. Then user will do the memory allocation.
The following are the default quantity of the below items: (See "Memory
Allocation" for the detailed information)
a. Department Number
b. Clerk Number
c. Table Number
d. PLU Number (The total number of PLUs available values are allocated
At the quantity field, after each entry, press [subttl] key and the next item will
appear, if user wants to keep the default value, directly press the [subttl] key to
skip.
6. After the set is completed, press [check] key to allocate the memory.
7. The message "ALLOC SUrE" is displayed.
8. Press [subttl]key to confirm (Other function keys to discard)
9. When completed, the register will print one receipt, which represents the quantity
for each item.
The receipt format:
automatically, so it cannot enter by manually.)
11