Web Diagnostics - Siemens SIMOCODE pro Function Manual

Communication
2.4 EtherNet/IP communication
2.4.13

Web diagnostics

SIMOCODE pro V EIP offers you with the web diagnosis the possibility of calling the
following information of the motor feeder from a PG/PC using an HTTP client:
● Status information
● Faults, warnings, events
● Measured values
● Service and statistical data
● Error buffer, error protocol
Web diagnostics are available in Chinese, Russian, English and German.
Activating the web server:
The default setting of the web server is "not active." To activate it, the "Ethernet
Parameters →Web Server Activated" parameter must be active.
Note
Restarting the communication interface
Each change to the configuration of the web server requires that the communication
interface be restarted.
A new start of the communication interface interrupts all Ethernet and PROFINET links and
reestablishes them afterward.
Setting the IP parameters:
To enable a link to be established via the web, SIMOCODE pro V EIP must have valid IP
parameters. You can find out how to make these settings in Chapter Setting up the IP
address (Page 114).
Configuration of the user name and password:
If the functions are to be used to control the motor feeder, a user must additionally be
configured with the user name and password. User name and password must not contain
any blanks. You perform the configuration under "Ethernet-Parameter → Webserver".
Web browser
For access to the HTML pages in the SIMOCODE pro V EIP, you need a web browser.
The following web browsers are suitable for communication with SIMOCODE pro etc.:
● Internet Explorer (recommended version: Version 11)
● Firefox (recommended version: Version 56)
● Google Chrome (recommended version: Version 62)
● Opera (recommended version: Version 49.0)
Note
Connection to a web client
Connection to a web client is supported.
120
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003