Web Diagnostics; Web Diagnostics Of The Tim 1531 Irc; Dns Configuration - Siemens SIMATIC TeleControl DNP3 Configuration Manual

3.10

Web diagnostics

3.10.1

Web diagnostics of the TIM 1531 IRC

Requirements
● The Web server of the module is enabled in the configuration, "Web server" parameter
group, and the interface is selected.
● The interface is enabled for access to the Web server in the configuration, "Ethernet
interface > Access to Web server" parameter group.
Starting Web diagnostics
1. Establish a physical connection between the engineering station and the SIMATIC
station.
2. Set the PC interface in such a way that the module can be reached.
Further help is available in the "Set PG/PC Interface" dialog box.
3. In the STEP 7 project, click the "Web diagnostics" button under the "Web diagnostics"
parameter group to establish the connection to the Web browser of the module.
The content is supplied by the integrated Web server of the module. For information on
operation and on the contents, see section WBM of the TIM 1531 IRC (Page 167).
3.11

DNS configuration

DNS server
A DNS server may be required when the module itself, a communications partner, or for
example an e-mail server should be reachable via the host name (FQDN).
DNS server for e-mail server address
During e-mail configuration, the address of the mail server via which the e-mails are sent
must be specified. The address of the mail server can be specified as an IP address or as an
FQDN.
If you specify the server address as an FQDN you need to configure a DNS server. In this
case the IP address of the mail server is determined via the configured DNS server.
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration
3.10 Web diagnostics
61