Displaying Logs; Log Command Example - Nortel BCM50e Configuration

Displaying logs

Use the sys logs display command to show all of the logs in the Business Secure
Router's log.
Use the sys logs category display command to show the log settings for all of the
log categories.
Use the sys logs display [log category] command to show the logs in an individual
Business Secure Router log category.
Use the sys logs clear command to erase all of the Business Secure Router's logs.

Log command example

This example shows how to set the Business Secure Router to record the access
logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
# .time
message
0|11/11/2002 15:10:12 |172.22.3.80:137
Firewall default policy: UDP(set:8)
1|11/11/2002 15:10:12 |172.21.4.17:138
Firewall default policy: UDP(set:8)
2|11/11/2002 15:10:11 |172.17.2.1
Firewall default policy: IGMP(set:8)
3|11/11/2002 15:10:11 |172.22.3.80:137
Firewall default policy: UDP(set:8)
4|11/11/2002 15:10:10 |192.168.10.1:520
Firewall default policy: UDP(set:8)
5|11/11/2002 15:10:10 |172.21.4.67:137
source
BCM50e Integrated Router Configuration - Advanced
Appendix K Log descriptions 303
destination
|172.22.255.255:137
|172.21.255.255:138
|224.0.1.60
|172.22.255.255:137
|192.168.10.255:520
|172.21.255.255:137
notes
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK
|ACCESS BLOCK