Table of Contents
Advertisement
158 Chapter 14 System information and diagnosis
Figure 81 WAN & LAN DHCP
Table 37
Secure Router and associated connections.
Table 37 System Maintenance menu diagnostic
Field
Ping Host
WAN DHCP Release
WAN DHCP Renewal
Internet Setup Test
Reboot System
Host IP Address=
N0115789
describes the diagnostic tests available in menu 24.4 for your Business
Description
Enter 1 to ping any machine (with an IP address) on your
LAN or WAN. Enter its IP address in the Host IP Address
field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation. Enter 4 to test the Internet
setup. You can also test the Internet setup in Menu 4 -
Internet Access. Refer to
page 61
Enter 11 to reboot the Business Secure Router.
If you entered 1 in Ping Host, enter the IP address of the
computer you want to ping in this field.
Enter the number of the selection you want to perform or
press [ESC] to cancel.
BCM50e Integrated Router
for more details.
Chapter 5, "Internet access," on
Advertisement
Table of Contents
