Table of Contents
Advertisement
Table 61 Sys commands
Command
load
reserve
save
m50Enable
[yes|no]
socket
filter
netbios
roadrunner
debug
display
restart
ddns
debug
display
restart
logout
cpu
display
[0:deny/1:permit]
disp
config <0:Between LAN and
WAN/ 3: IPSec Pass through/
4: Trigger Dial> <on|off>
<level>
<iface name>
<iface name>
<level>
<iface name>
BCM50e Integrated Router Configuration - Advanced
Appendix H Command Interpreter 251
Description
Saves UPnP information.
Saves UPnP information.
Turns Nortel's proprietary DHCP
enhancement feature on or off.
Displays the system socket's ID #,
type, control block address (PCB), IP
address and port number of peer
device connected to the socket
(Remote Socket) and task control block
(Owner).
Displays the current NetBIOS filter
modes.
Sets NetBIOS filters.
Enables or disables Road Runner
service.
0: disable (default)1: enable
Displays Road Runner information
iface-name: enif0, wanif0
Restarts Road Runner.
Enables or disables DDNS service.
Displays DDNS information.
Restarts DDNS.
This command has no effect.
Displays the CPU utilization.
Advertisement
Table of Contents
