Figure 72 Menu 24.1: System Maintenance: Status; Figure 73 Menu 24.1 - System Maintenance - Status; Table 34 System Maintenance: Status Menu Fields - Nortel BCM50e Configuration

Figure 72 Menu 24.1: System Maintenance: Status

Figure 73 Menu 24.1 — System Maintenance — Status
Port Status
WAN Down
LAN 100M/Full
Port Ethernet Address
WAN 00:13:49:00:00:02
LAN 00:13:49:00:00:01
System up Time:
Name:
Routing: IP
RAS F/W Version: VBCM222_2.6.0.0.002b1 | 07/24
COMMANDS: 1-Drop WAN 9-Reset Counters
Table 34
Status. These fields are read-only and meant for diagnostic purposes. The upper
right corner of the screen shows the time and date according to the format you set
in menu 24.10.

Table 34 System Maintenance: Status Menu Fields

Field
Port
Status
TxPkts
RxPkts
Cols
Tx B/s
Rx B/s
Menu 24.1 - System Maintenance - Status
TxPkts RxPkts
0 0
0 0
IP Address
0.0.0.0
192.168.1.1
0:22:37
Press Command:
describes the fields present in Menu 24.1 - System Maintenance -
Description
Identifies a port (WAN, or LAN) on the Business Secure Router.
Shows the port speed and duplex setting if you are using Ethernet
Encapsulation and Down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) or drop (dropping a call) if you are using
PPPoE Encapsulation.
The number of transmitted packets on this port.
The number of received packets on this port.
The number of collisions on this port.
Shows the transmission speed in Bytes per second on this port.
Shows the reception speed in Bytes per second on this port.
Chapter 14 System information and diagnosis 147
Cols Tx B/s
0 0
0 0
IP Mask
0.0.0.0
255.255.255.0
ESC-Exit
BCM50e Integrated Router Configuration - Advanced
00:22:34
Sat. Jan. 01, 2000
Rx B/s Up Time
0 0:00:00
0 0:22:32
DHCP
Client
Server