Nortel BCM50e Configuration page 267

Table 67 Bandwidth management commands
Command
class lan
wan
<wrr|prr>
<efficient>
disable
add # bandwidth xxx
del #
mod # <bandwidth
xxx>
<name xxx>
<priority x>
<borrow
on|off>
add # bandwidth xxx
BCM50e Integrated Router Configuration - Advanced
Appendix H Command Interpreter 267
Description
Sets the queueing mechanism
to fairness-based (WRR) or
priority-based (PRR).
Turns on the work-conserving
feature.
Disables bandwidth
management for traffic going
out the WAN interface.
Adds a class with bandwidth
<name xxx>
xxx b/s in LAN. The name is
for your information.
Sets the class priority. The
<priority
range is between 0 (the
x>
lowest) to 7 (the highest).
The class can borrow
<borrow
bandwidth from its parent
on|off>
class when borrowing is
turned on, and vice versa.
Deletes the class # and its
filter and all its children
classes and their filters in LAN.
Modifies the parameters of the
class in the LAN. A bandwidth
value is optional.
Sets the class name.
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest). The
priority is unchanged if you do
not set a new value.
The class can borrow
bandwidth from its parent
class when borrowing is
turned on, and vice versa.
Adds a class with bandwidth
<name xxx>
xxx b/s in WAN. The name is
for your information.
Sets the class priority. The
<priority
range is between 0 (the
x>
lowest) to 7 (the highest).