Figure 19 Menu 11.1: Remote Node Profile For Ethernet Encapsulation; Table 13 Fields In Menu 11.1 - Nortel BCM50e Configuration

Figure 19 Menu 11.1: Remote Node profile for Ethernet Encapsulation

Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server= N/A
Press Space Bar to Toggle.
Table 13

Table 13 Fields in menu 11.1

Field
Rem Node Name Enter a descriptive name for the remote node. This field
Active
Encapsulation
Service Type
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
describes the fields in
Description
can be up to eight characters.
Press [SPACE BAR] and then [ENTER] to select Yes
(activate remote node) or No (deactivate remote node).
Ethernet is the default encapsulation. Press
[SPACE BAR] and then [ENTER] to change to PPPoE or
PPTP encapsulation.
Press [SPACE BAR] and then [ENTER] to select from
Standard, RR-Toshiba (Road Runner Toshiba
authentication method) or RR-Manager (Road Runner
Manager authentication method). Choose one of the
Road Runner methods if your ISP is Time Warner's Road
Runner; otherwise choose Standard.
BCM50e Integrated Router Configuration - Advanced
Chapter 6 Remote Node setup 69
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= No
Figure 19.
Example
LAoffice
Yes
Ethernet
Standard