Nortel BCM50e Configuration page 268

268 Appendix H Command Interpreter
Table 67 Bandwidth management commands
Command
filter lan
wan
show interface
N0115789
del #
mod # <bandwidth
xxx>
<name xxx>
<priority x>
<borrow
on|off>
add # Daddr <mask
Dmask> Dport
Saddr <mask
Smask> Sport
protocol
del #
add # Daddr <mask
Dmask> Dport
Saddr <mask
Smask> Sport
protocol
del #
lan
Description
The class can borrow
<borrow
bandwidth from its parent
on|off>
class when borrowing is
turned on, and vice versa.
Deletes the class # and its
filter and all its children class
and their filters in WAN.
Modifies the parameters of the
class in the WAN. A bandwidth
value is optional.
Sets the class name.
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest).
The class can borrow
bandwidth from its parent
class when borrowing is
turned on, and vice versa.
Adds a filter for class # in LAN.
The filter contains destination
address (netmask),
destination port, source
address (netmask), source
port and protocol. Use 0 for
items that you do not want the
filter to include.
Deletes the LAN filter that
belongs to the specified LAN
class.
Adds a filter for class # in
WAN. The filter contains
destination address
(netmask), destination port,
source address (netmask),
source port and protocol. Use
0 for items that you do not
want the filter to include.
Deletes the LAN filter that
belongs to the specified WAN
class.
Displays the LAN interface
settings.