Basic Operation - Sharp PN-HM851 Operation Manual

1
2
3
4
5
6
7
8
9
10
1. HDMI
Switch the input mode to HDMI1 or HDMI2.
2. Numeric input buttons
0 to 9 are also used in conjunction with the ID SET button.
3. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
4. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
20
E

Basic Operation

5. VOLUME +/- (Volume adjustment)
Pressing + or - displays the VOLUME menu.
11
12
Press + or - to adjust the volume.
13
* If you do not press any buttons for about 4 seconds, the
6. INFORMATION
Displays monitor information.
INFORMATION1
INPUT MODE
SIZE
COLOR MODE
14
BRIGHT
VOLUME
ID No.
15
REMOTE No.
MODEL
16
VERSION
S/N
17
STATUS
18
19
3 8 4 0 x 2 1 6 0
20
INFORMATION2-1
APPLICATION VERSION
MONITOR CONTROL SELECT
Ethernet
Wireless LAN
3 8 4 0 x 2 1 6 0
The display changes from INFORMATION1 →
INFORMATION2-1 → INFORMATION2-2 → INFORMATION3
→ clear display, and so on every time you press this button.
When displaying INFORMATION, the display changes from
INFORMATION1 → INFORMATION2-1 → INFORMATION2-2
→ INFORMATION3 → INFORMATION1, and so on every time
you press the
Pressing the RETURN button disappears the display.
• INFORMATION3 shows the information when you have
• The display disappears automatically after about 15
7. FUNCTION
Use this to display the FUNCTION menu. (See page 36.)
8. ENTER
Confirms the setting.
V O L U M E 15
VOLUME menu automatically disappears.
01/01/2019 TUE 12:00:00 AM
: HDMI1
: WIDE
: STD
: 31
: 15
: 0
: 0
: PN-HM751
:
X.X.X.X
: XXXXXXXX
: 0000-000000-00-0000
NEXT:[ ]
V: 30 Hz H: 67.5 kHz
01/01/2019 TUE 12:00:00 AM
: X.X.XX
: LAN
: ON
IPv4 IP address : 192.168.150.002
IPv4 IP settings
: DHCP
MAC address : XX-XX-XX-XX-XX-XX
: ON
IPv4 IP address : XXX.XXX.XXX.XXX
IPv4 IP settings : DHCP
MAC address : XX-XX-XX-XX-XX-XX
NEXT:[ ]
V: 30 Hz H: 67.5 kHz
button.
used the expansion slot to expand the functions.
seconds.
END:[RETURN]
END:[RETURN]