Rs-232C Command Table - Sharp PN-HM851 Operation Manual

Controlling the Monitor with a computer (RS-232C)

RS-232C command table

How to read the command table
Command: Command field (See page 38.)
Direction: W When the "Parameter" is set in the parameter field (see page 38), the command functions as described
R The returned value indicated under "Reply" can be obtained by setting "????", "
Parameter: Parameter field (See page 38.)
Reply: Response (Returned value)
* : When POWER SAVE MODE is set to OFF:
When POWER SAVE MODE is set to ON:
Power control/Input mode selection
Function
Power control
Input mode selection
SCREEN menu
Function
AUTO
CLOCK
PHASE
POSITIONING POSITION OF THE LONGEST
DIRECTION
POSITION OF THE SHORTEST
DIRECTION
RESOLUTION LONGEST DIRECTION
SETTING RESOLUTION
SHORTEST DIRECTION
RESOLUTION
INPUT SIGNAL (D-SUB)
Check the resolution
RESET
42
E
under "Control/Response Contents".
(repeater control) in the parameter field. (See page 38.)
"●/○" : I ndicates a command which can be used in standby mode or when the power is on.
"–" : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
"●" : I ndicates a command which can be used in standby mode or when the power is on.
"○/–" : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
Command Direction
POWR W
R
INPS W
R
Command Direction
ASNC W
CLCK WR
PHSE WR
HPOS WR
VPOS WR
HRES WR
VRES WR
PXSL WR
PXCK R
ARST W
Parameter Reply
0 Switches to standby mode.
1 Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
0 Toggle change for input mode.
2 D-SUB
10 HDMI1
13 HDMI2
14 DisplayPort
21 OPTION
"ERR" when nothing is attached in the expansion slot.
24 APPLICATION
2 D-SUB
10 HDMI1
13 HDMI2
14 DisplayPort
21 OPTION
24 APPLICATION
Parameter Reply
1 When the input mode is D-SUB.
0-1200 0-1200 When the input mode is D-SUB.
Varies depending on the signal.
0-63 0-63 When the input mode is D-SUB.
0-800 0-800 When the input mode is D-SUB.
Varies depending on the signal.
0-200 0-200 When the input mode is D-SUB.
Varies depending on the signal.
300-1920 300-1920 When the input mode is D-SUB.
Only even numbers are valid for parameters.
Varies depending on the signal.
300-1200 300-1200
1 1 768) 1360 x 768
2 2 768) 1280 x 768
3 3 768) 1024 x 768
5 5 480) 848 x 480
6 6 480) 640 x 480
7 7 1050) 1680 x 1050
8 8 1050) 1400 x 1050
9 9 768) AUTO
10 10 480) AUTO
- Returns current resolution in the form of hhh, vvv.
1
?" or "???+"
Control/Response contents
Control/Response contents
*
●
*
-