Basic Operation; Using The Buttons On The Remote Control Unit And Monitor - Sharp PN-C705B Operation Manual

Using the buttons on the remote
control unit and monitor
 R emote control unit
1
2
3
4
5
6
7
8
9
10
 B uttons on the monitor
POWER HDMI 1 D-SUB
21 22
1. HDMI
Switch the input mode to HDMI1, HDMI2 or HDMI3.
2. Numeric input buttons
When HDMI CEC LINK is set to ON, use these buttons to
operate the device connected through the HDMI interface.
3. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
4. MODE (Picture mode selection)
Each time you press this button, the picture mode changes in
the following order (see page 26):
PC* → DYNAMIC → DYNAMIC (FIXED) →
STANDARD → MOVIE → PC*...
* For PC, switch only when the input mode is HDMI1,
HDMI2, HDMI3, and D-SUB (PC).
22
E

Basic Operation

11
12
13
14
15
16
17
18
19
20
INPUT BL OFF VOL ─ VOL + FREEZE
17 23 5 9
5. VOLUME +/- (Volume adjustment)
When the menu does not appear, press + or - to display the
volume menu and adjust the volume.
* If you do not press any buttons for about 3 seconds, the
VOLUME menu automatically disappears.
6. INFORMATION
You can check the input signal and input terminal.
• The display automatically disappears after about 5
seconds.
7. FUNCTION
Use this to display the FUNCTION menu. (See page 30.)
8. ENTER
Confirms the setting.
9. FREEZE
Freezes the video shown on the monitor. The touch panel
remains enabled while the video is frozen and touch actions
can be reflected. To cancel, press any button other than
the POWER button, the MUTE button, VOLUME + button
or VOLUME - button. Freeze is also canceled when the
input signal changes (switching to no signal, changing the
resolution, etc.).
Freezing the video for a long period could cause a residual
image.
10. Buttons for operating the HDMI-connected device
When HDMI CEC LINK is set to ON, use these buttons to
operate the device connected through the HDMI interface.
11. ID SET
This is not used with this monitor.
12. OPTION
This is not used with this monitor.
13. DP (DisplayPort)
This is not used with this monitor.
14. SIZE (Screen size selection)
The menu is displayed.
Press or buttons to select the screen size. (See page
24.)
15. PIP/PbyP
This is not used with this monitor.