Sharp PN-HM851 Operation Manual page 17

Remote control sensor out
Point the remote control unit toward the remote control sensor on the front of the monitor.
For the monitor in landscape orientation
16.4 feet (5m)
10º
10º
TIPS
• Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.
• Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.
• The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.
• Objects between the remote control unit and the remote control sensor may prevent proper operation.
• Replace the batteries when they run low as this may shorten the remote control's operation range.
• If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.
• Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.
Remote control
16.4 feet
sensor
(5m)
10º10º
Preparing the Remote Control Unit
For the monitor in portrait orientation
16.4 feet
(5m)
10º 10º
16.4 feet
(5m)
10º
10º
Remote control
sensor
17
E