Table of Contents
Advertisement
Using the touch menu
You can touch the screen to change input mode, volume, and
other settings.
1. Touch the TOUCH MENU button.
TOUCH MENU button
2. Touch the screen to change settings.
INPUT
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Input mode selection
Changes the input mode.
Input mode
DisplayPort
HDMI1
HDMI2
USB-C
OPTION
*1
• When the input mode is changed, the touch panel
connection also changes.
*1 This is displayed when you have used the option board
slot.
22
E
Basic Operation
DisplayPort
HDMI1
HDMI2
USB-C
OPTION
Video
DisplayPort input terminal
HDMI1 input terminal
HDMI2 input terminal
USB Type C port
Option board slot
(2) Volume adjustment
Adjusts the volume.
23
Increases the volume.
Decreases the volume.
Mutes the sound.
Touch again to return the sound to the original
volume.
(3) Settings
Adjust "AUDIO" and "PICTURE", configure setting for
"CONFIGURE QUAD-SCREEN". (See page 27.)
(4) Backlight off
Turn off the backlight.
The backlight will turn on when you operate the remote
control unit.
(5) FREEZE
Freezes the video shown on the monitor.
To cancel, press any button other than the POWER button,
MUTE button or VOLUME button.
Freeze is also canceled when the input signal changes
(switching to no signal, changing the resolution, etc.).
In some cases a residual image may occur. Do not freeze
the video for a long time.
(6) QUAD-SCREEN ON
You can display 4 screens at once. (See page 36.)
When quad-screen is displayed, the icon changes to the
QUAD-SCREEN OFF icon (
(7) RECONFIGURE QUAD-SCREEN
The 4 screens set in "SETTING INITIAL SCREEN" (see
page 31) are displayed.
(8) Exit touch menu
Closes the touch menu.
TIPS
• The touch menu can also be used with the remote control
unit.
(1) Hold down the INFORMATION button at least 5
seconds.
The touch menu appears.
(2) Select the setting item with the
(3) Set with the
or
button.
- The setting is entered.
- Press the RETURN button to exit the touch menu.
).
or
button.
button, and press the ENTER
Advertisement
Table of Contents
